Project: kappa

A CLI tool for AWS Lambda developers

Project Details

Latest version
0.7.0
Home Page
https://github.com/garnaat/kappa
PyPI Page
https://pypi.org/project/kappa/

Project Popularity

PageRank
0.0016451507047831717
Number of downloads
93825

===== kappa

.. image:: https://travis-ci.org/garnaat/kappa.svg?branch=develop :target: https://travis-ci.org/garnaat/kappa

.. image:: https://landscape.io/github/garnaat/kappa/develop/landscape.svg :target: https://landscape.io/github/garnaat/kappa/develop

Kappa is a command line tool that (hopefully) makes it easier to deploy, update, and test functions for AWS Lambda.

There are quite a few steps involved in developing a Lambda function. You have to:

  • Write the function itself
  • Create the IAM role required by the Lambda function itself (the executing role) to allow it access to any resources it needs to do its job
  • Add additional permissions to the Lambda function if it is going to be used in a Push model (e.g. S3, SNS) rather than a Pull model.
  • Zip the function and any dependencies and upload it to AWS Lambda
  • Test the function with mock data
  • Retrieve the output of the function from CloudWatch Logs
  • Add an event source to the function
  • View the output of the live function

Kappa tries to help you with some of this. It creates all IAM policies for you based on the resources you have told it you need to access. It creates the IAM execution role for you and associates the policy with it. Kappa will zip up the function and any dependencies and upload them to AWS Lambda. It also sends test data to the uploaded function and finds the related CloudWatch log stream and displays the log events. Finally, it will add the event source to turn your function on.

If you need to make changes, kappa will allow you to easily update your Lambda function with new code or update your event sources as needed.

Installation

The quickest way to get kappa is to install the latest stable version via pip::

pip install kappa

Or for the development version::

pip install git+https://github.com/garnaat/kappa.git

Quick Start

To get a feel for how kappa works, let's take a look at a very simple example contained in the samples/simple directory of the kappa distribution. This example is so simple, in fact, that it doesn't really do anything. It's just a small Lambda function (written in Python) that accepts some JSON input, logs that input to CloudWatch logs, and returns a JSON document back.

The structure of the directory is::

simple/
├── _src
│   ├── README.md
│   ├── requirements.txt
│   ├── setup.cfg
│   └── simple.py
├── _tests
│   └── test_one.json
└── kappa.yml.sample

Within the directory we see:

  • kappa.yml.sample which is a sample YAML configuration file for the project
  • _src which is a directory containing the source code for the Lambda function
  • _test which is a directory containing some test data

The first step is to make a copy of the sample configuration file:

.. code-block:: bash

cd simple
cp kappa.yml.sample kappa.yml

Now you will need to edit kappa.yml slightly for your use. The file looks like this:

.. code-block:: yaml

---
name: kappa-simple
environments:
  dev:
    profile: <your profile here>
    region: <your region here>
    environment_variables:
      <key 1>: <value 1>
      <key 2>: <value 2>
    policy:
      resources:
        - arn: arn:aws:logs:*:*:*
          actions:
            - "*"
  prod:
    profile: <your profile here>
    region: <your region here>
    policy:
      resources:
        - arn: arn:aws:logs:*:*:*
          actions:
          - "*"
lambda:
  description: A very simple Kappa example
  handler: simple.handler
  runtime: python2.7
  memory_size: 128
  timeout: 3

The name at the top is just a name used for this Lambda function and other things we create that are related to this Lambda function (e.g. roles, policies, etc.).

The environments section is where we define the different environments into which we wish to deploy this Lambda function. Each environment is identified by a profile (as used in the AWS CLI and other AWS tools) and a region. You can define as many environments as you wish but each invocation of kappa will deal with a single environment. An environment can optionally contain environment variables as key-value pairs. Each environment section also includes a policy section. This is where we tell kappa about AWS resources that our Lambda function needs access to and what kind of access it requires. For example, your Lambda function may need to read from an SNS topic or write to a DynamoDB table and this is where you would provide the ARN (Amazon Resource Name_) that identifies those resources. Since this is a very simple example, the only resource listed here is for CloudWatch logs so that our Lambda function is able to write to the CloudWatch log group that will be created for it automatically by AWS Lambda.

.. _Amazon Resource Name: http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html

The lambda section contains the configuration information about our Lambda function. These values are passed to Lambda when we create the function and can be updated at any time after.

To modify this for your own use, you just need to put in the right values for profile and region in one of the environment sections. You can also change the names of the environments to be whatever you like but the name dev is the default value used by kappa so it's kind of handy to avoid typing.

Once you have made the necessary modifications, you should be ready to deploy your Lambda function to the AWS Lambda service. To do so, just do this:

.. code-block:: bash

kappa deploy

This assumes you want to deploy the default environment called dev and that you have named your config file kappa.yml. If, instead, you called your environment test and named your config file foo.yml, you would do this:

.. code-block:: bash

kappa --env test --config foo.yml deploy

In either case, you should see output that looks something like this:

.. code-block:: bash

kappa deploy
# deploying
# ...deploying policy kappa-simple-dev
# ...creating function kappa-simple-dev
# done

So, what kappa has done is it has created a new Managed Policy called kappa-simple-dev that grants access to the CloudWatch Logs service. It has also created an IAM role called kappa-simple-dev that uses that policy. And finally it has zipped up our Python code and created a function in AWS Lambda called kappa-simple-dev.

To test this out, try this:

.. code-block:: bash

kappa invoke _tests/test_one.json
# invoking
# START RequestId: 0f2f9ecf-9df7-11e5-ae87-858fbfb8e85f Version: $LATEST
# [DEBUG]	2015-12-08T22:00:15.363Z	0f2f9ecf-9df7-11e5-ae87-858fbfb8e85f	{u'foo': u'bar', u'fie': u'baz'}
# END RequestId: 0f2f9ecf-9df7-11e5-ae87-858fbfb8e85f
# REPORT RequestId: 0f2f9ecf-9df7-11e5-ae87-858fbfb8e85f	Duration: 0.40 ms	Billed Duration: 100 ms 	Memory Size: 256 MB	Max Memory Used: 23 MB
#
# Response:
# {"status": "success"}
# done

We have just called our Lambda function, passing in the contents of the file _tests/test_one.json as input to our function. We can see the output of the CloudWatch logs for the call and we can see the logging call in the Python function that prints out the event (the data) passed to the function. And finally, we can see the Response from the function which, for now, is just a hard-coded data structure returned by the function.

Need to make a change in your function, your list of resources, or your function configuration? Just go ahead and make the change and then re-run the deploy command:

.. code-block:: bash

kappa deploy

Kappa will figure out what has changed and make the necessary updates for you.

That gives you a quick overview of kappa. To learn more about it, I recommend you check out the tutorial.

Policies

Hands up who loves writing IAM policies. Yeah, that's what I thought. With Kappa, there is a simplified way of writing policies and granting your Lambda function the permissions it needs.

The simplified version allows you to specify, in your kappa.yml file, the ARN of the resource you want to access, and then a list of the API methods you want to allow. For example:

.. code-block:: yaml

policy:
  resources:
    - arn: arn:aws:logs:*:*:*
      actions:
        - "*"

To express this using the official IAM policy format, you can instead use a statement:

.. code-block:: yaml

policy:
  statements:
    - Effect: Allow
      Resource: "*"
      Action:
        - "logs:*"

Both of these do the same thing.